MAXI-CURE™ is one of the most trusted adhesives in archery for fletching vanes onto aluminum and carbon arrow shafts. It's an extra-thick gel cyanoacrylate (CA) that sets fast, bonds stronger than standard super glue, and bridges small gaps that a thinner CA would just run through — all at one of the most affordable price points for the job.
Why archers reach for it:
- Extra-thick viscosity holds vanes in place while it cures — no clamping or taping needed
- Bonds fiberglass, carbon, aluminum, hardwood, metal, and rubber
- Bridges small gaps without running down the shaft
- Reaches full strength in about 3 hours; pairs with Insta-Set™ Accelerator for a near-instant cure
For gluing to the inside, cloth-textured surface of fiberglass, scrape the bonding area with a razor blade or coarse sandpaper before applying MAXI-CURE™ or any other adhesive.
Available Sizes:
- BSI-111: 1/2 oz (14.2 g)
- BSI-112: 1 oz (28.4 g)
- BSI-113: 2 oz (56.8 g)
Directions For Use:
Unscrew the top from the nozzle. For finer applications, use the extender tip. Apply MAXI-CURE™ to one side of the parts being joined, then hold them tightly together for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow the adhesive to spread. Insta-Set™ Accelerator can be sprayed onto the CA that oozes from joints to speed curing. Full strength is reached in about three hours. Wipe the nozzle clean before replacing the screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40°F to 220°F. Soak the extender tip in acetone for cleaning.
"Buy this and you'll say goodbye to all the other super glues out there... lasts forever and the tip never really clogs. The glue doesn't stick to the plastic bottle."
Tips:
- Soak the extender tip in acetone for easy cleaning.
- We highly recommend Insta-Set™ Accelerator to speed up the set time for any extra-thick super glue.